win a ball from Bowling.com
« previous next »
Pages: 1 [2]

Author Topic: Track Machine  (Read 3358 times)

mike_tymvios

  • Jr. Member
  • **
  • Posts: 22
Track Machine
« on: March 26, 2006, 04:38:59 PM »
I've recently ordered a Track Machine and later this week, I will have it drilled. I cannot wait for the time to throw this PIN SMASHING MACHINE! I have watched other guy's videos and I am very impressed on how this ball clears the heads. I wanted to buy the Big One but after a good research, I finally ordered the Machine and I am sure I will not be dissapointed.
Logged

 

icetink

  • Hero Member
  • *****
  • Posts: 1578
Re: Track Machine
« Reply #16 on: March 30, 2006, 06:19:32 PM »
The Machine clears the fronts so well for me.  When the shot breaks down though, I find it really hard to get through the midlanes.  On fresh, the ball is an absolute beast!

Tim, are you gonna come out and bowl in The Encore this year?
--------------------
Dino
Evolutionary. Revolutionary.
Track
Logged

Rev_O

  • Hero Member
  • *****
  • Posts: 5060
Re: Track Machine
« Reply #17 on: March 31, 2006, 01:13:11 AM »
i just drilled another machine for this weekends regional. I am having a little trouble getting a ball to read the lane on the fresh, so per Del's advice, I drilled another Machine, 4x3, pin below the ring about 1.5 inches above the midline, with the MB way out in an early roll position. I then hit the surface with a burgandy pad. We'll see how it works this weekend in Cuyahoga Falls!!


--------------------
Rev-O
Track International Regional Staff Member
http://www.trackbowling.com/
Vise Inserts Staff
http://www.viseinserts.com
For all of your bowling needs, go to http://WWW.BOWLINGKINGDOM.COM

Logged

mike_tymvios

  • Jr. Member
  • **
  • Posts: 22
Re: Track Machine
« Reply #18 on: March 31, 2006, 01:22:21 AM »
Does anybody know what is the finish of the machine? I know that for the Robo Rule, the finish is 800 Grit Sheen, what applies for the Machine?

Edited on 3/31/2006 2:21 AM
Logged

Rev_O

  • Hero Member
  • *****
  • Posts: 5060
Re: Track Machine
« Reply #19 on: March 31, 2006, 05:10:18 AM »
i believe it was compound polished. Recommended polish for it is Magic Shine.
--------------------
Rev-O
Track International Regional Staff Member
http://www.trackbowling.com/
Vise Inserts Staff
http://www.viseinserts.com
For all of your bowling needs, go to http://WWW.BOWLINGKINGDOM.COM

Logged

tog831

  • Full Member
  • ***
  • Posts: 119
Re: Track Machine
« Reply #20 on: March 31, 2006, 06:22:04 AM »
I am getting a Machine and would like to know how its reaction is compared to an aggressive.I was thinking of the same drill pattern as the AA.I have the AA 5x5 with pin under ring.I like the smooth arc the AA has at the breakpoint.Is the Machine stronger or would be similar to the AA?

I also have a GP2 that is drilled 4x4 with pin under ring and mb on val.

How could i work the Machine in to fit with these balls?

My PAP is 5in. up 7/8 ball speed 15 to 17 mph rev rate high.
Logged

TheDude

  • Hero Member
  • *****
  • Posts: 3170
Re: Track Machine
« Reply #21 on: March 31, 2006, 08:01:21 AM »
No, Dino. I won't be at encore this year. I have left and gone adult. ( as soon as regular season is out) I got an email from Andrew Dela Cruz about it tho. I am going to ask Raymond if he is going to go back to defend the title. He won last year by the way using a Track heat we drilled for him.

If your at any of the super schools you might see me there. I work at Buffa's seasonally from sept to about january each year.

gimme a shout on msn thedude3170@hotmail.com
--------------------
Timothy @Juniors Pro-Shop
Staff Writer 7-10 Split Magazine,EGO Communications
Montreal, Quebec.
Logged
Timothy @Juniors Pro-Shops
LaSalle, Quebec-Located inside Pont Mercier Lanes.
Keep them honest!

Ebay store updated very often: http://stores.ebay.com/gumby3170?refid+store

clintdaley

  • Hero Member
  • *****
  • Posts: 4246
Re: Track Machine
« Reply #22 on: March 31, 2006, 08:11:00 AM »
Tog831...

As for the Machine compared to the Aggressive and Gp2....the Machine, being particle pearl, will clear the heads easier than the other 2 balls as the others are dull particles with a solid cover....When the GP2 or Aggressive just start to over under you, that is when the Machine (factory surface assumed) starts to shine! It can handle the little drier lanes, and the recovery on the backend is great! It would be a great addition to your arsenal!

Clint
--------------------
Clint Daley-Owner
Lets Go Bowling Daley
Inside Hunt Club Lanes
Salem, Ohio 44460

Track Pro Shop staff
www.trackbowling.com







Logged









mike_tymvios

  • Jr. Member
  • **
  • Posts: 22
Re: Track Machine
« Reply #23 on: April 05, 2006, 12:29:35 AM »
And finally the Machine arrived! I had it drilled last night and try it a little bit (not on fresh).

What can I say... this ball is amazing!

Now I am sure for my choice. Thank you all guys for your great advice!!!


EVOLUTIONARY! REVOLUTIONARY! Simply Track
Logged

Rev_O

  • Hero Member
  • *****
  • Posts: 5060
Re: Track Machine
« Reply #24 on: April 15, 2006, 10:24:10 PM »
i have 2 machines laid out differently, and both perform on there specific condition wonderfully!
--------------------
Rev-O
Track International Regional Staff Member
http://www.trackbowling.com/
Vise Inserts Staff
http://www.viseinserts.com
For all of your bowling needs, go to http://WWW.BOWLINGKINGDOM.COM

Logged
Pages: 1 [2]
« previous next »