BallReviews

Equipment Boards => Track => Topic started by: Brandon502 on April 08, 2007, 02:16:26 PM

Title: Need Ball Needed
Post by: Brandon502 on April 08, 2007, 02:16:26 PM

Ok , i am a lefty with medium revs and a ball speed of about 16-17mph bowling down and in. i have a tournament comming up soon and i was looking for a very aggresive ball for this tournament and for the use on a shot of medium wooden lanes.

Title: Re: Need Ball Needed
Post by: C-G ProShop-Carl on April 08, 2007, 10:23:49 PM

If you can find a Rule GP2....get one!
--------------------
Carl Hurd
C-G Pro Shop (owner/operator)
Youngstown Ohio


Tag Team Member #1

TAG TEAM COACHING!!!!!!/Co-Founder

Title: Re: Need Ball Needed
Post by: Brandon502 on April 09, 2007, 12:42:07 PM

On the backend

Title: Re: Need Ball Needed
Post by: Brandon502 on April 09, 2007, 04:54:55 PM

Span : 4 1/2 pin under ring

Title: Re: Need Ball Needed
Post by: Brandon502 on April 09, 2007, 05:41:33 PM

Could A Robo Rule Be what im looking for ?

Title: Re: Need Ball Needed
Post by: HAMMERDOWN103 on April 09, 2007, 09:01:30 PM

If you are looking for a Rule GP2, Machine, Power Machine, or Mean Machine. I have them used. The Mean Machine and Rule GP2 came with lefty pin cg mb setups and the current pattern shouldnt end up in your track area. Both are 16

Title: Re: Need Ball Needed
Post by: tenpinspro on April 10, 2007, 06:47:19 AM

quote:

---

Could A Robo Rule Be what im looking for ?

---

The Robo is also a good fit.  If not, you can sand the cover on the Mean Machine some and it can handle the heavier stuff pretty well.
--------------------
Rick Leong - Ten Pins Pro Shop  
Vise Inserts Staff
Dexter Advisory Staff

Tag Team Coaching - Co-Founder

See profile for Track Ball videos

*El Presidente of the Track Legion

Title: Re: Need Ball Needed
Post by: tenpinspro on April 10, 2007, 10:24:52 AM

quote:

---

i have a tournament comming up soon and i was looking for a very aggresive ball for this tournament  

---

Oh you're right gspot.  I went by this statement though...
--------------------
Rick Leong - Ten Pins Pro Shop  
Vise Inserts Staff
Dexter Advisory Staff

Tag Team Coaching - Co-Founder

See profile for Track Ball videos

*El Presidente of the Track Legion

Title: Re: Need Ball Needed
Post by: spinner031 on April 16, 2007, 03:22:09 PM

I think that as far as Track balls go, the Mean Machine is your answer.  However, if you are looking for a continuous, predicable arc inward, I hear that the Robo Rule is also a great choice.  Make sure you get it drilled for what you are looking to get out of it.  What else is in your arsenal?

Edited on 4/16/2007 3:21 PM

Edited on 4/16/2007 3:21 PM

Title: Re: Need Ball Needed
Post by: RDS on April 16, 2007, 05:29:35 PM

Power Machine - Polished lightly, Strike Machine out of box, or Machine sanded lightly. Actually just get an Inertia and you will be fine.
--------------------
Current Arsenal:
Power Machine
Strike Machine
Machine
Arsenal Artillary "300"
Angular Artillary
Rule Delta 1
Inertia
Heat Blast "300"



Edited on 4/16/2007 5:29 PM