BallReviews

Equipment Boards => Track => Topic started by: alex on December 26, 2005, 02:05:34 PM

Title: Need drilling help
Post by: alex on December 26, 2005, 02:05:34 PM

I need drilling help on a Rule Delta One for hwavy oil on synthetic lanes.I have been using a Slash,drilld 4 by 3 on a med/oil condition for the first fourteen weeks and averaging 208 but now they have changed to a heavy oil pattern. I have gone from standing on 20 throwing across 13 to 8 to playing down 5 while standing on 10 and my carry has suffersd,lot of 10 pins.I through around 16mph and my pap is 41/4 over and 1/2 up.Thanks for your help.

Title: Re: Need drilling help
Post by: Re-Evolution on December 26, 2005, 10:18:39 PM

I would go with the pin 2" above your midline and 4" from PAP and the MB on or past VAL.
--------------------
STORM TRACK
www.Bowling-Info.com (http://"www.Bowling-Info.com/index.php")
BR.com's unofficial FAQ section (http://"http://www.ballreviews.com/Forum/Replies.asp?TopicID=74110&ForumID=16&CategoryID=5")

Title: Re: Need drilling help
Post by: C-G ProShop-Carl on December 26, 2005, 10:41:47 PM

alex,

StormTrack's suggestion is not bad. What surface is currently on your Slash? Is it polished, dull or a slight shine from absorbing oil?
Let me know that info and I will give you a suggestion.

-Carl
--------------------
C-G Pro Shop (owner/operator)
Youngstown Ohio

Track Intl.-Amateur/Pro Shop Staff

www.trackbowling.com

www.startabowlingrevolution.com


Tag Team Member #1

Title: Re: Need drilling help
Post by: alex on December 27, 2005, 07:54:08 AM

My Slash is oob surface.

Title: Re: Need drilling help
Post by: C-G ProShop-Carl on December 27, 2005, 01:28:28 PM

alex,

With the info we currently have I agree with layout suggested by Storm Track. The Delta is naturally going to start up sooner than the Slash, and even with a fairly early rolling layout like that you may even enjoy some good backend reaction out of it depending on the pattern.

Goodluck,
Carl
--------------------
C-G Pro Shop (owner/operator)
Youngstown Ohio

Track Intl.-Amateur/Pro Shop Staff

www.trackbowling.com

www.startabowlingrevolution.com


Tag Team Member #1

Title: Re: Need drilling help
Post by: alex on December 27, 2005, 02:18:14 PM

Thanks for everyones help.

Title: Re: Need drilling help
Post by: tenpinspro on December 27, 2005, 04:43:54 PM

Hey alex,

The 4x4mb sounds good unless you want it to be just a tad more stable.  The Rule Delta 1 offers quite a bit of backend strength and if you're used to a "track" shot of about 13-8 with your Slash, the Delta 1 is going to be fairly angular on the backend with that layout.  I'd push the mb to 3.5 for a little sooner roll and that will help change the reaction shape some.  Just a thought for you....
--------------------
Rick Leong - Ten Pins Pro Shop
Track Intl. - Amateur/Pro Shop Staff  
Vise Inserts Staff
www.Trackbowling.com
www.startabowlingrevolution.com

See profile for Track Ball videos

*El Presidente of the Track Revolution