Author Topic: drilling for rule (Read 1238 times)

Brian362 · « **on:** October 17, 2004, 09:24:41 PM »

Getting a rule for a league on synthetics that carrydown quickly. The lanes start pretty decent, (medium/heavy), but break down fast. Not so much drying heads as large amounts of carrydown. I'm a med/high rev player with a low track. 4 5/16 over and 1/4 up. I have medium ball speed, @ 16mph. I was looking at the instructions on the track web site and I'm a little confused.
I don't want it to be super aggressive, having to launch the gutter cap to use it. Anybody drill one for a customer similar to me, let me know the results. Any ideas and suggestions are welcome.

Thanks.
--------------------
Brian362

tenpinspro · « **Reply #1 on:** October 18, 2004, 01:47:56 PM »

Hey Brian,

I'd suggest a 4x3.5mb from pap, pin 2-3 above midline. This should produce a little more forward roll for you. The roll should work well in helping you read the mids a little quicker and that will help you create the finish needed on the backend. Hope this helps...
--------------------
Rick Leong
Ten Pins Pro Shop
Track Intl. - Amateur/Pro Shop Staff
Vise Inserts Staff

C-G ProShop-Carl · « **Reply #2 on:** October 18, 2004, 02:12:36 PM »

Brian,

Rick hit the drilling I was thinking about. The one thing that is worrisome is heavy oil for you could only be mediums for others (know what I mean?). So the good thing with the drilling that Rick suggested is that if it is too strong a SLIGHT coverstock adjustment would help.

Goodluck
-EX-
--------------------
C-G Pro Shop (owner/operator)
Youngstown Ohio

Track Intl.-Advisory Staff

Brian362 · « **Reply #3 on:** October 18, 2004, 04:49:53 PM »

Thanks again guys.
--------------------
Brian362

Author Topic: drilling for rule (Read 1238 times)

Brian362

drilling for rule

tenpinspro

Re: drilling for rule

C-G ProShop-Carl

Re: drilling for rule

Brian362

Re: drilling for rule