win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Anyone ever use clean and sheen?  (Read 1225 times)

Slopsurprise

  • Hero Member
  • *****
  • Posts: 2100
Anyone ever use clean and sheen?
« on: April 13, 2006, 11:59:49 AM »
I have seen the description on tracks website that says its a cleaner/restorer on 320-1000 grit balls. Lets just say you have a ball at 600 grit, will it just clean the ball and leave the finish prep where it was or, will it alter the surface of the ball?

Also, it dosent say that its OK to use on particle equipment. Would it not be wise to use it on particle???

Here is the link to it,

http://www.trackbowling.com/gear/cleaners.cfm
Logged

 

kreitz

  • Jr. Member
  • **
  • Posts: 94
Re: Anyone ever use clean and sheen?
« Reply #1 on: April 13, 2006, 09:24:31 PM »
Slopsurprise, Clean and Sheen will put a light coat of polish on the ball! How high the gloss is depends on how much pressure and the length of time on the spinner.Clean and Sheen may be used on particle balls. It is the spec'd polish for the GP 2. Hope this helps!

Ken
Logged

Mark T. Trgovac

  • Hero Member
  • *****
  • Posts: 1270
Re: Anyone ever use clean and sheen?
« Reply #2 on: April 13, 2006, 10:40:25 PM »
Clean n sheen is great at getting the compound finish back to anyball track makes that had a compound finish. It is what was used for the animal, gp2 and others.
--------------------
Mark "scoot" Trgovac
C-G Pro Shop
Unoffical "Spokesman"
Youngstown, Ohio

"The Revolution has started. The sides were drawn, and if you didnt Choose the side ofEvolution you will fall to the power that it has."

and I said "PLEASE, I ONLY WANT TO GET ONE MORE BALL." he responded "THAT WAS WHAT 12 BALLS AGO." I said back "WELL, YA BUT THAT IS NOT THE POINT."
Logged
Mark T. "Scoot" Trgovac
Track Staffer
Bowling Ball Driller

legend4life95

  • Hero Member
  • *****
  • Posts: 3802
Re: Anyone ever use clean and sheen?
« Reply #3 on: April 13, 2006, 10:48:43 PM »
If you want to leave the ball at 600 grit, then just use Clean N Dull(now Clean N Tacky)to clean the ball. It will not alter the cover. I have clean n smooth, clean n sheen and clean n dull. Clean n Sheen I beleive finishes close to 1200 grit with a sheen gloss. Clean n Smooth finishes closer to 1500 grit with less gloss. Both are good, but really get to close to the same finish.
--------------------


****Kids in the back seat cause accidents; accidents in the back seat cause kids.****
Logged

Laybzz74

  • Hero Member
  • *****
  • Posts: 5688
Re: Anyone ever use clean and sheen?
« Reply #4 on: April 13, 2006, 11:03:40 PM »
Tim (previous thread) is RIGHT ON with that info !!!
--------------------
Man, I LOVE this game; and I love it even more now that I'm using LEGENDS/LaneMasters balls ... Master the Lanes with Legendary hitting power !!!

Robb in O'Fallon, IL 62269 (near Scott AFB)
LAYBZZ74@AOL.COM
Logged
**** Official "L/LM" ball "junkie" ****

http://www.lanemastersbowling.com
 
 "Master the Lanes with Legendary hitting power" !!!

Robb in O Fallon, IL 62269 (near Scott AFB)
LAYBZZ74@AOL.COM (Email addy)

tenpinspro

  • Hero Member
  • *****
  • Posts: 4161
Re: Anyone ever use clean and sheen?
« Reply #5 on: April 15, 2006, 12:18:52 PM »
Hey Slop,

Clean and Sheen is our compound finish but as stated, if you lean on it on a spinner, it can shine a ball.  You don't want to apply too much pressure if you want it to have that matte or sheen look to it.  It brings a surface closer to about 1000 and our Clean and Smooth does finish to 1500 as Legend has stated.
--------------------
Rick Leong - Ten Pins Pro Shop
Track Intl. - Amateur/Pro Shop Staff  
Vise Inserts Staff
www.Trackbowling.com
www.startabowlingrevolution.com

See profile for Track Ball videos

*El Presidente of the Track Revolution

Logged
Rick Leong - Ten Pins Pro Shop
Co-Founder - Tag Team Coaching
"El" Presidente of the Legion
Pages: [1]
« previous next »