BallReviews
Equipment Boards => Track => Topic started by: SteveAustin2808 on May 22, 2005, 11:15:10 AM
-
Ordered my X-Ception 5.0 today! If you already have one punched up and have it drilled reply here and let me know how they reacted for you. I'm really looking for the one's who have their's drilled like the following below:
Pin below the ring finger
Pin above the ring finger
These are the main two, but I want to know of other types of layouts for this one and the reaction that resulted from the layout! Thanks again for the help guys!
SteveAustin2808@aol.com
--------------------
Everybody's Got A Price!
Hammer Sux!
Get on the FASTTrack to success!!
-
Well guys, I had to run it blind on the layouts of the 5.0, brought it to my pro shop and we laid it out with the Pin below the bridge. I've never had a layout such as this, this is a special ball in my opinion, it's just an incredible ball from Track.
--------------------
One Thing to Know About Humans:
Everybody's Got A Price!
Ball Companies I Dislike:
Hammer Sux!
What Are You Waiting For? Get on the FASTTrack to success!!
Track Amateur Staff Wanna-Be!
-
Still waiting on mine to come from Track. I have 2 on the way, and will be glad to help with any further questions about the 5.0 once I get to see what it can do in my hands!
Clint
--------------------
Clint Daley-Owner
Lets Go Bowling Daley
Salem, Ohio 44460
TRACK ADVISORY PRO SHOP STAFF
-
Steve,
Sorry bud, I mist have missed this thread.
The pin below the bridge.....where is the MB placed? Rick and I both have ours drilled with the pin below the bridge..
-EX-
--------------------
C-G Pro Shop (owner/operator)
Youngstown Ohio
Track Intl.-Amateur/Pro Shop Staff
-
i'll be drilling mine this coming week. I'm thinking of drilling it like my rule, pin below fingers, mb rt of thumb. Not 100% sure yet. I'll post pics when finished!
--------------------
Rev-O
Track International Amateur Staff Member
http://pg.photos.yahoo.com/ph/nagyiii/detail?.dir=5406&.dnm=9e95.jpg&.src=ph
R.I.P Dick Weber 1929-2005
-
Hey EX,
Mike's my real name, anyways...the pin below the bridge, mass bias @ 5 o'clock...ball indeed revs up hard in the middle part of the lane, I have practiced quite a bit with this ball.
I also got my Heat in the other day and we drilled it opposite with the pin above the bridge...I believe we drilled the heat with a 5 1/2" pin.
The 5.0 was a 4 1/2" pin from my PAP. It's a step below the Rule GP2 as I was told. I put my Animal and Phenom Unleashed in my back-up bag. So for now, I have the Rule GP2, X-Ception 5.0, Slash, and Heat. Which I think is a stout arsenal.
I really like the fact with the four I have in the bag right now all have different layouts.
Rule GP2 -- Pin below ring finger
X-Ception 5.0 -- Pin below the bridge
Slash -- Pin above ring finger
Heat -- Pin above the bridge
On a final note, I can't believe I got a 5.0 before Clint did! EX and Rick, where is the mass bias at on yours?
--Michael--
--------------------
One Thing to Know About Humans:
Everybody's Got A Price!
Ball Companies I Dislike:
Hammer Sux!
What Are You Waiting For? Get on the FASTTrack to success!!
Track Amateur Staff Wanna-Be! 
Edited on 5/27/2005 3:41 PM
-
Track is backordered on my weight, and some distributors got theirs already, so I am still waiting.......
Clint
--------------------
Clint Daley-Owner
Lets Go Bowling Daley
Salem, Ohio 44460
TRACK ADVISORY PRO SHOP STAFF
-
SteveAustin2808--
I drilled mine 4x4 stacked and no x-hole. The second one is 5x31/2 with an extra hole, MB is a #3 on the drill sheet.
Stacked is the best for the backend that most people are looking for, the carry down is not a problem with is layout and surface(OOB). The second ball is so smooth the whole lane, its predictable and charges pretty early. I love this ball and will be drilling more of them.
GOOD LUCK AND GOD BLESS
--------------------
TRACK REGIONAL STAFF MEMBER

-
Mike,
I placed my MB about 1 inch left of my VAL. It is a strong rolling position. So with the 5.0 I get the strong roll in the midlanes, yet still get that super POP on the backends.
-EX-
--------------------
C-G Pro Shop (owner/operator)
Youngstown Ohio
Track Intl.-Amateur/Pro Shop Staff
-
Rick probably ordered all of the 12lbs for himself.

--------------------
C-G Pro Shop (owner/operator)
Youngstown Ohio
Track Intl.-Amateur/Pro Shop Staff
-
Hey Mike,
My mb is on val and is 4 inches away, my layout is 4 7/8 x 4mb. It also is pretty smooth for me but the backends can be pretty strong when I grabbed on it.
quote:
Rick probably ordered all of the 12lbs for himself.
Oh yeah, lets see you book 14 with 12lbs...hahaha Don't laugh, just plugged the wife's 13lb Sheer Havoc......for me....
quote:
Hey EX,
Mike's my real name
Hey Ex, remember the 6 million dollar man? or are you THAT young?
You can't be, you watched the Greatest American Hero......lol
--------------------
Rick Leong - Ten Pins Pro Shop
Track Intl. - Amateur/Pro Shop Staff
Vise Inserts Staff
Trackbowling.com
Edited on 5/27/2005 11:42 PM
-
My 10#s with Morpheous are hard to make, thats why they are rare!
Clint
--------------------
Clint Daley-Owner
Lets Go Bowling Daley
Salem, Ohio 44460
TRACK ADVISORY PRO SHOP STAFF