win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Will this ball make through the scale room?  (Read 1671 times)

rocnbol

  • Jr. Member
  • **
  • Posts: 84
Will this ball make through the scale room?
« on: February 14, 2010, 04:41:32 PM »
Pulling some equipment out of storage I was saddened to see my beloved Black Widow solid with a crack in the shell from the CG to MB. Ive since put some practice games on it and the crack has traveled no further. I really love this ball at Nats and buying a replacement is not in the cards right now.

Anyone know if this will get rejected at the weigh in?
--------------------
"Take the time to do it right and it takes less time" Pat Parelli
Logged
"Take the time to do it right and it takes less time" Pat Parelli

 

J_Mac

  • Hero Member
  • *****
  • Posts: 6778
Re: Will this ball make through the scale room?
« Reply #1 on: February 15, 2010, 05:36:59 AM »
There is a technique to repair cracks that might come in handy here...

If you drill a small hole (1/4" to 1/2") through the cover where the crack terminates you will usually relieve the stress that created the crack.  You can then carefully plug the two holes and the crack will usually draw plug material from the plugged holes via capillary action.
--------------------
Bowlingballreviews.com... Gone, but not forgotten. Wayback Machine - http://www.archive.org/web/web.php
Logged

bluerrpilot

  • Hero Member
  • *****
  • Posts: 1235
Re: Will this ball make through the scale room?
« Reply #2 on: February 15, 2010, 07:41:54 AM »
It will be ok as far as weight goes but out of tolerance for roundness and size
--------------------
"USBC is concerned that technology has overtaken player skill in determining success in the sport of bowling"

http://www.phxbowling.com/acba
http://www.viseinserts.com/
Logged

zonepro

  • Full Member
  • ***
  • Posts: 154
Re: Will this ball make through the scale room?
« Reply #3 on: February 15, 2010, 07:55:04 AM »
As long as the ball passes the size test, and the static weights check out, you will be ok.  They have a ring that they pass over the ball, if the ball does not fit through the ring, it will be rejected.  I had a ball that had about a 4" crack in it, that happened just before I left for nationals one year.  The ball passed the size test and the weights were fine, so I was allowed to use it.
Logged

Krakken

  • Sr. Member
  • ****
  • Posts: 438
Re: Will this ball make through the scale room?
« Reply #4 on: February 15, 2010, 08:15:11 AM »
I would hope they don't allow it.  Not that I want you to bowl bad or anything but a ball with a crack in it could damage the lanes.  That affects everyone that bowls on that pair.

Could also damage the ball return equipment as well.
--------------------
ROTO GRIP, There is NO Substitute
Slow Feet, Soft hand = Lots of strikes
Logged

zonepro

  • Full Member
  • ***
  • Posts: 154
Re: Will this ball make through the scale room?
« Reply #5 on: February 15, 2010, 08:19:02 AM »
The crack on my ball was nowhere near the ball track, so perhaps that had something to do with them allowing it too.
Logged

Krakken

  • Sr. Member
  • ****
  • Posts: 438
Re: Will this ball make through the scale room?
« Reply #6 on: February 15, 2010, 08:40:24 AM »
near the track doesn't matter. still can jam up or damage the ball return parts, and once it hits the pocket and starts deflecting the crack could easily contact the deck. or if you come out of it wrong, stuck on he thumb etc...

IF it cracks the ball is done.  throw it away and replace it.  I know they aren't cheap, but you wouldn't try to drive to work on a bare rim would you?
--------------------
ROTO GRIP, There is NO Substitute
Slow Feet, Soft hand = Lots of strikes
Logged
Pages: [1]
« previous next »