BallReviews

Equipment Boards => Visionary => Topic started by: axeweldr on May 21, 2009, 03:47:17 PM

Title: Drilling on G-3
Post by: axeweldr on May 21, 2009, 03:47:17 PM

I am thinking about laying this ball out, with the pin over the bridge, and between the fingers.  Cg kicked out right, so that would be a 5 1/2 x 3 1/2 layout for me.  What are your thoughts on the layout on this ball.  Want to get some insight on drilling them, since I just joined the Test Staff.

John
--------------------
Got Revs?

RIP THONG PRINCESS

Title: Re: Drilling on G-3
Post by: Nor Cal Bowler on May 22, 2009, 12:31:31 AM

It should work well for you if you are a high rev player. I'm guessing its a long pin?
--------------------
Visionary Test Staff Member and owner of every worldwide Visionary release...
_______________________________________________

http://s450.photobucket.com/albums/qq229/NorCalBowler/visionary/

Title: Re: Drilling on G-3
Post by: MI 2 AZ on May 22, 2009, 01:16:18 AM

Pin to PAP of 5.5 would be pretty weak for me.

Since you are a member of the test staff now, why don't you take advantage of it and call and talk to Jason or someone else there about what layouts would work best for you.  



--------------------

I am the Sgt Schultz of bowling.
"I know nothing! I see nothing! NOTHING!"
_________________________________________

New to BR? - Please check this:  BR FAQ (http://"http://www.ballreviews.com/Forum/Replies.asp?TopicID=74110&ForumID=16&CategoryID=5")

Title: Re: Drilling on G-3
Post by: axeweldr on May 22, 2009, 03:16:01 AM

Very good point!  I really like that idea.  Gotta do that with all of them, and maybe I get figure out my solid problem.

John
--------------------
Got Revs?

RIP THONG PRINCESS

Title: Re: Drilling on G-3
Post by: gsback on May 22, 2009, 04:18:11 AM

John,

Do check with Jason.  I had the SS drilled that way and I really won't use it much because I don't have a ton of hand and the ball goes longer than I would like.

If anything, I should have put it with CG kicked towards or into the palm to make it more aggressive.....but didn't.  Getting an Immortal Pearl and will be doing that though.
--------------------
BR.com.....going down the toilet one nugget at a time!!  

g thing is back....with a vengeance!!  

www.visionarybowling.com - Accept no substitute for the very best there is!!

Title: Re: Drilling on G-3
Post by: getuaload on May 22, 2009, 08:57:15 AM

The G3 is a Long & Strong ball. If you have plenty of hand the layout sounds just fine. But if you are speed dominant & low revs, that would be too weak.

With the pearl cover the ball will get threw the heads nice and will have a strong very angular backend.

I would contact Jason and ask his opinion anyway you dont want to drll it wrong and have a ball you cant use.
--------------------
TO BE THE MAN, YOU HAVE TO BEAT THE MAN

Title: Re: Drilling on G-3
Post by: axeweldr on May 22, 2009, 09:41:33 AM

Thanks for the input,  I will get these four layed out, with some pics. Videos would be soon to follow!

John
--------------------
Got Revs?

RIP THONG PRINCESS

Title: Re: Drilling on G-3
Post by: rustylegacy on May 22, 2009, 03:49:59 PM

Thats pretty close to what mine is, definition of skid/snap. It still flares about 5" even with this drill for me. Gotta have some dry in the back to work to full potential though.

Title: Re: Drilling on G-3
Post by: VBPadvertising on May 22, 2009, 04:25:54 PM

Hi John,

The responses you have received so far are pretty much right on.  Whether or not that layout would work for you, really depends on your ball speed and rev rate.  For your average bowler (average speed and revs) or speed dominant bowler, that layout might be a little too long unless they are bowling on drier lane conditions.

That being said, if you are a high rev rate player, with average ball speed, this layout would likely work well for you.  The longer pin to PAP will help you get the ball down the lane, while kicking the CG out will help give you more control with alot less over/under than you would get if you stacked it.

Jason Wonders
Visionary Bowling Products