win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: B/G Centaur Layout  (Read 1621 times)

themagician

  • Hero Member
  • *****
  • Posts: 2971
B/G Centaur Layout
« on: January 17, 2010, 01:47:44 PM »
Guys, I do remember reading somewhere about being careful on the mass bias placement on this piece. I'll be drilling one up soon and was curious if someone could shed some light on that for me just so I have some info for my own sake when I head out to get this one drilled.
--------------------
BowlingChat.net

Logged
-Mike
-MOTIV Staff

 

Juggernaut

  • Hero Member
  • *****
  • Posts: 6498
  • Former good bowler, now 3 games a week house hack.
Re: B/G Centaur Layout
« Reply #1 on: January 17, 2010, 09:51:21 PM »
The MB on this ball isn't very strong, so I was told to keep it pretty close to the thumbhole for good results.

 If I remember correctly, the diff is only .015, and keeping the MB in the thumb area helps strengthen the balls reaction a bit.
--------------------
Good transactions list in my profile

 ILLEGITIMI, NON-CARBORUNDUM!
Logged
Learn to laugh, and love, and smile, cause we’re only here for a little while.

themagician

  • Hero Member
  • *****
  • Posts: 2971
Re: B/G Centaur Layout
« Reply #2 on: January 17, 2010, 10:02:30 PM »
Okay, i thought I recalled reading somewhere about MB locations leading to backwards flaring or something of the like. I'll continue to dig but if thats all it was i'll probably just drop the MB in my thumb and leave it be.
--------------------
BowlingChat.net

Logged
-Mike
-MOTIV Staff

scotts33

  • Hero Member
  • *****
  • Posts: 8452
Re: B/G Centaur Layout
« Reply #3 on: January 17, 2010, 10:14:41 PM »
I have two.  Both black locator dots on either side of thumb.  They in all reality roll about the same.  Surface dictates pretty much everything with this ball.  I keep it at 2000ab now to tame out wet/dry.

What I use now.  http://s132.photobucket.com/albums/q29/scotts33/?action=view¤t=VisBlueGreenCentaur.jpg&newest=1

What I have used in the past.  Pin above bridge. http://s132.photobucket.com/albums/q29/scotts33/?action=view¤t=VisBlueGreenCentaur-1.jpg&newest=1
--------------------
Scott

Logged
Scott

themagician

  • Hero Member
  • *****
  • Posts: 2971
Re: B/G Centaur Layout
« Reply #4 on: January 17, 2010, 10:27:21 PM »
Good to know Scott, more information the better. I am planning on polishing it before it even gets drilled and using it on some dry conditions, not bone dry but ones where an Onyx Vibe wants to hook too early and too much. Its going to be an experiment and hopefully will work out great.
--------------------
BowlingChat.net

Logged
-Mike
-MOTIV Staff

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: B/G Centaur Layout
« Reply #5 on: January 18, 2010, 07:50:08 AM »
quote:
I have two.  Both black locator dots on either side of thumb.  They in all reality roll about the same.  Surface dictates pretty much everything with this ball.  
--------------------
Scott



Actually, Scott, the surface doesn't dictate everything, for me, anyway.

I've found the basic pin position does affect the length quite a bit. I have used 2 basic ones: 1, pin below the ring finger, about a 4" pin to PAP, and, 2, the pin over the ring finger, about a 4.5"-4.75" pin to PAP for me, does get more length. It's not a huge difference but it seems significant to my ball reaction. I've done this with 16 lb balls and with 15 lb. balls.

This doesn't make the ball any snappier, due, I believe, to the small differential.

I've kept the MB locator pin, a tiny, 1/8" diameter, clear pin, either just to the left or just to the right of the thumb hole. That has seemed to work.

--------------------
"None are so blind as those who will not see."
Logged
"None are so blind as those who will not see."

gsback

  • Hero Member
  • *****
  • Posts: 1619
Re: B/G Centaur Layout
« Reply #6 on: January 18, 2010, 07:58:35 AM »
I can't remember what Jason and I talked about on this ball....but point was that unlike other cores, if you got the ball to roll over the thumb a little, a stronger core has the chance to pull it away, but with the Blue/Green, it wouldn't.

I do remember him mentioning the backwards flaring, but I don't think it was on this.  That was from a generic conversation.....I believe.
--------------------
BR.com.....going down the toilet one nugget at a time!!  

g thing is back....with a vengeance!!  

www.visionarybowling.com - Accept no substitute for the very best there is!!
Logged
www.visionarybowling.com - Accept no substitute for the very best there is!!

Best line I've heard about politics....
REMEMBER....POLITICIANS AND DIAPERS SHOULD BE CHANGED OFTEN AND FOR THE SAME REASON!!

scotts33

  • Hero Member
  • *****
  • Posts: 8452
Re: B/G Centaur Layout
« Reply #7 on: January 18, 2010, 08:04:43 AM »
Pin above bridge long pin to PAP and pin next to ring basically for me roll the same length if both are same surface.  Didn't really make that much difference.  Flare about the same.

For tweeners/strokers unless on really dryish flat patterns this ball is not going to carry well moving deep. Guys like TwoHands Steve yes at 400 - 450 revs and up I'd believe they'd carry better deeper.  That's my take.


--------------------
Scott

Logged
Scott

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: B/G Centaur Layout
« Reply #8 on: January 18, 2010, 09:28:57 AM »
quote:
Pin above bridge long pin to PAP and pin next to ring basically for me roll the same length if both are same surface.  Didn't really make that much difference.  Flare about the same.


Agreed, but mine is a lsightly larger difference with pin  under, vs over.
I believe it changes the RG enough for it make a difference for me.

I now have both and was toying with the idea of finishing the pin under ball at 2000 or 4000 Abralon, vs the 2000 + polish I have on the pin over ball.

quote:

For tweeners/strokers unless on really dryish flat patterns this ball is not going to carry well moving deep. Guys like TwoHands Steve yes at 400 - 450 revs and up I'd believe they'd carry better deeper.  That's my take.
--------------------
Scott


3rd arrow is as deep as I've been able to play this ball, except 8 - 9 years ago, where I used it as a fall back shot at Nationals, playing between 4th and 5th arrow. But those sport shots are a different animal anyway.
--------------------
"None are so blind as those who will not see."
Logged
"None are so blind as those who will not see."
Pages: [1]
« previous next »