win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: polish ?  (Read 4961 times)

getuaload

  • Hero Member
  • *****
  • Posts: 911
polish ?
« on: May 07, 2007, 06:08:01 AM »
What type of polish do you guys have the best result with ?

I have seen good results with black magic.

--------------------
Visionary Test staff 07/08
Logged

 

JMORRIS

  • Hero Member
  • *****
  • Posts: 625
Re: polish ?
« Reply #1 on: May 07, 2007, 02:20:00 PM »
I use Nu Finish Car Polish.  Works just as good, if not better, then the bowling brands and costs way less!

Logged

Rock77

  • Hero Member
  • *****
  • Posts: 3621
Re: polish ?
« Reply #2 on: May 07, 2007, 02:50:37 PM »
Haven't used it but I heard that the "Special Sauce" sold by Beansproshop is some of the best stuff out there.
--------------------
Visionary Test Staff Member '07-'08
Logged

getuaload

  • Hero Member
  • *****
  • Posts: 911
Re: polish ?
« Reply #3 on: May 07, 2007, 02:56:57 PM »
in the past when i was using Lane#1 Buzzsaw mike told me to use
Mothers Mag & aluminum wheel polish. It worked great just didnt know if it would be good on Visionary stuff.
--------------------
Visionary Test staff 07/08
Logged

scotts33

  • Hero Member
  • *****
  • Posts: 8452
Re: polish ?
« Reply #4 on: May 07, 2007, 03:05:49 PM »
get,

charlest will be by and tell you the best polishes to use w/ grit and without.  He knows more about this subject than any other on BR.

I have used on my Solid "Pumpkin" a variation of LM/L polish and also Beans's very light coat both w/out grit..  Also tried Storm Step #1 w/ grit.  Results varied on the condition I was trying to defeat.


--------------------
Scott

Logged
Scott

scooter19530

  • Sr. Member
  • ****
  • Posts: 423
Re: polish ?
« Reply #5 on: May 07, 2007, 03:14:58 PM »
question for JMORRIS, is that thelarge orange bottle? i was looking at that and thought about giving it a try.
Logged

JMORRIS

  • Hero Member
  • *****
  • Posts: 625
Re: polish ?
« Reply #6 on: May 07, 2007, 03:24:24 PM »
quote:
question for JMORRIS, is that thelarge orange bottle? i was looking at that and thought about giving it a try.


Yes, it is.  It's like $5 or $6 on most auto stores, Walmart, etc...

I'm not sure how good it would work by hand, but it works great on a spinner!
Logged

BrunswickBowler123

  • Full Member
  • ***
  • Posts: 227
Re: polish ?
« Reply #7 on: May 07, 2007, 03:38:38 PM »
storm moonshine is the nest
Logged

scooter19530

  • Sr. Member
  • ****
  • Posts: 423
Re: polish ?
« Reply #8 on: May 07, 2007, 03:45:20 PM »
funny you should say that. i am in the process of making my own. i took an old treadmill motor since we never used it anyway, mounted it ona cabinet with the fly wheel sraight up. i am having a friend weld some bolts on the wheel so a can put a flower pot on it and snug it on. i actually took the control panel and mounted it on a stand so i can control the speed. it would go up to 8 mph when running before so i will need to slow it down, it's 17.8 amps so it wil fly if i want it to. i can't move it, but it's pretty cool. i have it out in the garage and i live in indiana so i am not too sure how it will hold up in the winter. we were going to throw it away cause the belt kept screwing up so i said what the heck. when it's done i will throw some pictures on the sight.
Logged

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: polish ?
« Reply #9 on: May 07, 2007, 04:34:12 PM »
quote:
in the past when i was using Lane#1 Buzzsaw mike told me to use
Mothers Mag & aluminum wheel polish. It worked great just didnt know if it would be good on Visionary stuff.
--------------------
Visionary Test staff 07/08


I'd be very careful with stuff not made for bowling balls, in general.
The only non-bowling ball specific polishes I have used were auto polishing and rubbing compounds, and 3M's Finesse-It II. Brunswick have already proved the auto compounds (That is, the stuff made for car paints) are safe and BECAUSE they are labelled that they do not contain waxes or silicones.

Both can clog the pores of the resin compounds of which balls are made.

Re:bowling ball polishes
There are two basic kinds: those that contain some abrasive or grit and those that don't.

Thos that do will change the grit level of the ball; the others will not change it, only make it shine for great er skid thru the heads.

Some of those with no abrasive:
Legends Factory finish polish
Track's Magic Shine
Ebonite Factory Finish
Brunswick's High Gloss polish
Ultimate's Black Magic
Neo-Tac's Renew-it

Some of those with Abrasive:
Storm's Reacta Shine
Storm's Xtra Shine
Brunswick's Rough Buff
Track's Clean and Sheen
Ultimate's Quick Cut  (Kut?) and Shine (not technically a polish)
Storm's Step polishes
Columbia's Degree polishes



--------------------
"None are so blind as those who will not see."
Logged
"None are so blind as those who will not see."

JohnnyRocket

  • Full Member
  • ***
  • Posts: 196
Re: polish ?
« Reply #10 on: May 07, 2007, 05:14:53 PM »
So charlest what is the best one to use for polishing with grit and without grit.

JR
Logged

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: polish ?
« Reply #11 on: May 07, 2007, 07:26:32 PM »
quote:
So charlest what is the best one to use for polishing with grit and without grit.

JR


There is no single best one, that I am aware of.

What I use most often are
Polish w/abrasive: Storm Xtra Shine for gloss and Track Clean and Sheen for a compound polish
Polish w/no abrasive: Brunswick High Gloss polish, Track Magic Shine and Legends polish equally.

What I prefer is to use the polish made for or suggested by the company whose ball I am changing. That said, Xtra Shine and Clean and Sheen work on everything I tried them on, so far.
--------------------
"None are so blind as those who will not see."

Edited on 5/7/2007 7:25 PM
Logged
"None are so blind as those who will not see."
Pages: [1]
« previous next »