win a ball from Bowling.com

Author Topic: AMB vs Ogre  (Read 3492 times)

TWOHAND834

  • Hero Member
  • *****
  • Posts: 4350
AMB vs Ogre
« on: February 16, 2011, 01:24:30 AM »
  Just basically want to get some confirmation if there is enough difference between the AMB Solid and Ogre Solid to warrant having both.  I know the core strength in the AMB is stronger but as far as cover strength, is the React stronger, similar, or weaker than the Eradicator?


Peace doesnt always have to be silent.
Steven Vance
Former Pro Shop Operator
Former Classic Products Assistant Manager

 

scotts33

  • Hero Member
  • *****
  • Posts: 8452
Re: AMB vs Ogre
« Reply #1 on: February 16, 2011, 09:48:51 AM »
For me the React-A-Tack is stronger.  If you can find an FMG I'd pick that over a AMB Solid.  Same cover React-A-Tack with better core.

Scott

Scott

TWOHAND834

  • Hero Member
  • *****
  • Posts: 4350
Re: AMB vs Ogre
« Reply #2 on: February 16, 2011, 09:56:11 AM »
Thanks Scott.  That was pretty much my gut feeling being that the React was stronger than the Eradicator.  However, with the React being a few years older than the Erad, I wanted to make absolutely sure.



Peace doesnt always have to be silent.
Steven Vance
Former Pro Shop Operator
Former Classic Products Assistant Manager

Spike2112

  • Hero Member
  • *****
  • Posts: 570
Re: AMB vs Ogre
« Reply #3 on: February 16, 2011, 12:16:23 PM »
Second the Frankie May suggestion! Much stronger piece than either the AMB or the Pumpkin. Love that React-A-Tack coverstock.
 
 
Spike



gsback

  • Hero Member
  • *****
  • Posts: 1619
Re: AMB vs Ogre
« Reply #4 on: February 17, 2011, 02:57:40 AM »
Steven,
 
When you throw strong cover/core equipment, do you find it rolling out???  That's the one thing I would be curious about with such a strong cover in the FMG.  I would guess a little polish and a pin above bridge should do wonders for you, but am curious.


BR.com.....going down the toilet one nugget at a time!!  

g thing is back....with a vengeance!!  

www.visionarybowling.com - Accept no substitute for the very best there is!!
www.visionarybowling.com - Accept no substitute for the very best there is!!

Best line I've heard about politics....
REMEMBER....POLITICIANS AND DIAPERS SHOULD BE CHANGED OFTEN AND FOR THE SAME REASON!!

TWOHAND834

  • Hero Member
  • *****
  • Posts: 4350
Re: AMB vs Ogre
« Reply #5 on: February 17, 2011, 08:31:36 AM »
I had a FMG once before and liked it alot.  I had to take the cover to 2000 before I could really use it.  But it took to surface change really well.  Out of box was way too early.  I had my favorite layout in it which was a 5 inch pin to PAP (pin above the ring finger), cg/MB kicked out just far enough to need a small weight hole down.  I thought about getting the AMB simply because of curiosity since I have had the FMG. 



Peace doesnt always have to be silent.
Steven Vance
Former Pro Shop Operator
Former Classic Products Assistant Manager

scotts33

  • Hero Member
  • *****
  • Posts: 8452
Re: AMB vs Ogre
« Reply #6 on: February 17, 2011, 08:38:25 AM »
Came across this on explaining why another user has issues with stronger equipment.  I'd seen it years back and good explanation.
 
Old vid shot by Britton Rieder a few years back before he was with Storm/RG.  It explains a lot on what people see.


Scott

Scott

ch_flash

  • Full Member
  • ***
  • Posts: 140
Re: AMB vs Ogre
« Reply #7 on: February 17, 2011, 09:05:31 AM »
Thats something that I will have to watch for. Thanks for posting that, Scott.


If you didn't like that strike, just watch this one!

http://visionarybowling.com/ Test Staff Member
If you didn't like that strike, watch this one!

River700

  • Hero Member
  • *****
  • Posts: 864
Re: AMB vs Ogre
« Reply #8 on: February 17, 2011, 06:16:30 PM »
One thing that people are not taking into consideration when drilling such a strong ball like this is putting the pin in a position where it will help the ball retain axis tilt and rotation better which would help the ball not burn up as much along with the correct surface prep. For the record both the franky may gryphon and the amb solid use the same react-a-tack cover just that the gryphon uses a symmetrical core where as the amb uses a stronger mas bias core.  So putting the pin at 3 1/4 to 3 3/4 from your pap for the amb solid and then 3 3/4-5 to pap for the franky may will help the ball save some energy and not burn up as much when bowling on a decent amount of oil. Then use a balance hole and surface to fine tune it. If you want confirmation on the pin distance to pap you can take a look at the Morich site for the dual angle layout method if you don't believe me..lol!
 
Twohand, yes you would be alright having both the ogre solid and the amb solid, but there will be a decent gap between the two depending on drill and surface prep. So, the amb for the heavier longer stuff where as the ogre solid for more of a benchmark type of reaction, hope that helps! 


Bowling is fun, enjoy it, don't hate it
 
Edited by River700 on 2/17/2011 at 7:22 PM

TWOHAND834

  • Hero Member
  • *****
  • Posts: 4350
Re: AMB vs Ogre
« Reply #9 on: February 18, 2011, 07:10:31 AM »
River,

 

I have a pretty good idea how the layout will be considering my rev rate.  I have nothing with the pin close to being leverage.  I have one ball with a 2 inch pin. my Ebonite Black Ice.  Everything else is pin anywhere between 4.5 - 5 inches and then vary the angles and weight hole placement.  Now the biggest battle is convincing the woman that even though I have 20 bowling balls in the closet, I still need at least one more.



Peace doesnt always have to be silent.
Steven Vance
Former Pro Shop Operator
Former Classic Products Assistant Manager

TWOHAND834

  • Hero Member
  • *****
  • Posts: 4350
Re: AMB vs Ogre
« Reply #10 on: February 18, 2011, 07:20:00 AM »
I just got confirmation from Jason that the Eradicator and the React and quite similar.  He stated that the Eradicator cover is not as "clean" as the React.  The React tends to get through the heads better.  But overall, they have the same base materials.  So that is really good to know.



Peace doesnt always have to be silent.
Steven Vance
Former Pro Shop Operator
Former Classic Products Assistant Manager

River700

  • Hero Member
  • *****
  • Posts: 864
Re: AMB vs Ogre
« Reply #11 on: February 18, 2011, 05:43:13 PM »
That is good to know as I have thought about getting an ogre for awhile now the black/orange one.

Bowling is fun, enjoy it, don't hate it

Trimman2

  • Full Member
  • ***
  • Posts: 183
Re: AMB vs Ogre
« Reply #12 on: February 19, 2011, 06:35:58 AM »
This is what I thought of the two covers. Nice to have that confirmation. I always needed some oil to use any of them. When used properly the Ogre and the FMG were about controling the backends. If I needed more of an angular backend, the AMB was the one.  
 



TWOHAND834 wrote on 2/18/2011 8:20 AM:
I just got confirmation from Jason that the Eradicator and the React and quite similar.  He stated that the Eradicator cover is not as "clean" as the React.  The React tends to get through the heads better.  But overall, they have the same base materials.  So that is really good to know.



Peace doesnt always have to be silent.